Fig. 8From: Role of interfaces on the mechanical response of accumulative roll bonded nanometallic laminates investigated via dislocation dynamics simulationsAverage residual stresses in the fcc (blue markers) and bcc (red markers) for an \(\sim\)200 nm thick \(\{1\ 1\ 2\}/\{1\ 1\ 2\}\), (a-c), and a \(\{1\ 1\ 0\}/\{1\ 1\ 1\}\), (d-f), Fe/Cu NML. Left, center, and right columns show the components along the transverse direction (TD; sample XX), rolling direction (RD; sample YY), and normal direction (ND; sample ZZ), respectively, for each layer thickness, based on the convention used in the manuscript. The corresponding Euler angles (in radians) are \(\phi _1 = 0.34906585, \Phi = 0.95531662, \phi _2 = 0.78539816\) for the Cu phase, and \(\phi _1 = 2.8751788, \Phi = 1.57079633, \phi _2 = 0.78539816\) for the Fe phaseBack to article page